Kenmore 10644254401 side-by-side refrigerator

User Manual - Page 8

For 10644254401.

PDF File Manual, 48 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Waterdrippingonthedefrostheaterduringadefrostcycle Ifthetemperatureistoowarmortoocoldintherefrigeratoror
maycauseasizzlingsound, freezer,firstchecktheairventstobesuretheyarenot
blockedbeforeadjustingthecontrols.
Aseachcycle ends, you may hear a gurgling sound due to
the refrigerant flowing in your refrigerator.
Contraction and expansion of the inside walls may cause a
popping noise.
You may hear air being forced over the condenser by the
condenser fan.
You may hear water running into the drain pan during the
defrost cycle.
REFRIGERATOR USE
Ensuring Proper Air Circulation
In order to ensure proper temperatures, you need to permit air to
flow between the two sections. Cold air enters the bottom of the
freezer section and moves up. It then enters the refrigerator
section through the top vent. Air then returns to the freezer as
shown.
Do not block any of these vents with food such as soda, cereal,
bread, etc. If the vents are blocked, airflow will be prevented and
the temperature controls will net function properly.
IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To prevent
odor transfer from food, wrap or cover foods tightly.
Using the Controls
Your model may have Rotary Controls or Slide Controls
IMPORTANT:
Your refrigerator will not ceel when the Refrigerator Control is
set to OFK
The Refrigerator Control adjusts the refrigerator compartment
temperature. The Freezer Control adjusts the freezer
compartment temperature. Higher numbered settings make
the compartment colder. Lower numbered settings make the
temperature less cold.
Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.
NOTE: Adjusting the Refrigerator and Freezer Controls to a
higher (colde¢} setting will not cool the compartments any
faster.
The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
8
For your convenience, your controls are preset at the factory.
When installing your refrigerator, make sure that the controls are
still preset to the "mid-settings" as shown.
Rotary Controls
FREEZER REFRIGERATOR
! I
, , 3 4
COLD COLDER _U_ 1 $ COLDER
Slide Controls
Freezer Refrigerator
cold 1 2 A 3 4 colder off 1 2 A 3 4 colder
AdjuslJng Controls
NOTE: Wait at least 24 hours between adjustments and then
recheck the temperatures.
If you need to adjust temperatures, adjust the refrigerator
temperature first.
Rotary Controls
Turn the control right (clockwise) to make the cor'npartr'nent
colder. Turn the control left (counterclockwise) to make it less
cold.
Slide Controls
Slide the control one setting to the right to make the
compartment colder. Slide the control one setting to the left to
make it less cold.
CONDITION/REASON: SETTING
ADJUSTMENT:
REFRIGERATOR tee cold REFRIGERATOR
- Not set correctly for your Control one setting
conditions lower
REFRIGERATOR tee warm REFRIGERATOR
- Boor opened often, large amount Control one setting
of food added or room temperature higher
very warm
FREEZER toe cold FREEZER Control one
- Not set correctly for your setting lower
conditions
FREEZER tee warm/toe little ice FREEZER Control one
- Boor opened often, or large setting higher
amount of food added or very cold
room temperature (can't cycle often
enough) or heavy ice usage
Ice Maker and Storage Bin
(on some models - Accessory)
Turning the Ice Maker On/Off
NOTE: Do not force the wire shutoff arm up or down.
The on/off switch for the ice maker is a wire shutoff arm located
on the side of the ice maker.
1. To turn the ice maker on, simply lower the wire shutoff arm.
Loading ...
Loading ...
Loading ...