Snapper RZT22500BVE2 7800011 Hydro Drive 250z

Operator’s Manual - Page 32

For RZT22500BVE2. Also, The document are for others Snapper models: RZT20440BVE2

PDF File Manual, 36 pages, Read Online | Download pdf file

RZT22500BVE2 photo
Loading ...
Loading ...
Loading ...
Troubleshooting,Adjustments,& Service
Figure 34. Mower Belt Routing - 44" & 50" Decks
A. Right Arbor Pulley
B. Left / Center Arbor Pulleys
C. PTO Pulley
D. Stationary Idlers
E. Belt Tensioning Idler
Figure 35. Belt Guard Removal
A. Belt Guard (Left side shown, right side similar)
B. Securing Hardware
MOWER BELT REPLACEMENT
To avoid damaging belts, DO NOTPRY BELTS OVER PULLEYS.
44" & 50" Decks:
1. Park the rider on a smooth, level surface such as a
concrete floor. Disengage the PTO, lock the motion
control levers into their neutral locked positions, turn
off the engine, and remove the ignition key.
2. Remove the hardware (B, Figure 35) securing the
belt guards (A) covering the left and right arbor
pulleys, and remove the guards.
3. Raise the mower deck to its highest cutting position.
4. Pull back firmly on the belt tensioning idler (E, Figure
34) in the direction indicated, and remove the belt
from the left arbor pulley (A).
5. Remove the old belt from the remaining pulleys.
6. Reversing steps 4 & 5, install the new belt, following
the routing in Figure 34. Be sure to replace the belt
guards.
31
Loading ...
Loading ...
Loading ...