Loading ...
TOOLSREQUIRED:
3!8dn Wrench
7/16dn Wrench
Cross4ip Screwdriver
HARDWARE iNCLUDED:
26-INCH CABINET HARDWARE
E__ #14 - 10 x 5!8dn Hex Screws(Qty: 16)
#14 - 10 x 3/4 Cross4ip Screw
(Qty: 4)
HARDWARE INCLUDED:
404NCH CABINET HARDWARE
@
CASTER INSTALLATION (26-iNCH CABINET)
items Needed:
#14 - 10 x 5/8dn Hex Screws (Qty: 16)
3!8dn Wrench
Process:
NOTE: Use adequate personne_ for this operation.
NOTE: Failure to instal_ easter angles may result in
premature cabinet failure.
Place the unit on its top. Use packaging matedat to
protect the paint finish.
Position caster angles on the cabinet. Flanges should be
toward the inside and pointed up.
Attach casters and caster angles using (4) #14 - 10 x 5/8
Hex Screws for each caster. Mount both swivel casters
on the same side of the cabinet as the side handle.
Wrench tighten all screws. Do not overtighten.
Return the unit to its upright position.
Caster angles
(flanges inside)
#14 - 10 x 3!4dn Screws
(Qty: 16)
1/4 - 20 x 5/8 Screw (Qty: 16)
1!4dn Nut (Qty: 16)
NOTE: Not att assembly instructions wiii relate to your model
SIDE HANDLE ATTACHMENT
Items Needed:
#14 - 10 x 3/4 Cross4ip Screw (Qty: 4)
Crossqip Screwdriver
Process:
- Attach the side handle using (4) #14 - 10 x 3/4 Crossqip
screws.
- Hand tighten. Do not overtighten.
@
CASTER INSTALLATION (40-INCH CABINET)
Items Needed:
1/4 - 20 x 5/8 Screw (Qty: 16)
1!4dn Nut (Qty: 16)
7/16dn Wrench
Process:
NOTE: Use adequate personnel for this operation.
Remove the bottom drawer by following the drawer
removal instructions.
Lay the cabinet down on its back. Use packaging
material to protect the paint finish.
Mount both swivel casters on the same side of the cart
as the side handle.
Attach each caster using (4) 1/4-20 x 5/8 screws and
(4) 1/4" nuts per caster.
Wrench tighten atl screws.
Return the cart to its upright position.
/
-20 x 5!8dn Screw
Loading ...
Loading ...
Loading ...