Loading ...
Loading ...
Loading ...
Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIREHAZARD,
The lint screen is 2.
inside the dryer Pull
drum, on the straight
back wall. out.
I. Use the finger
holes to pull
the lint screen 3.
straight out.
_ ARNING: DO NOT run the
dryer with the lint screen
loose, damaged or missing.
Doing so can cause over-
heating, can damage fabrics and
can be a FIRE HAZARD.
4.
5.
Lightly
squeeze the
body, as
shown, while
pulling the
cover off, \
Roll lint off the \
screen with
your fingers. Squeeze body;
DO NOT rinse pull cover off.
or wash the
screen. Wet lint is hard to remove.
Replace the cover on the body of
the lint screen.
Push the lint screen straight back
in until it clicks into place
Lint removal
Lint can gather inside the dryer and create a fire hazard.
This lint should be removed every 2 to 3 years, or more often,
depending on dryer usage.
Cleaning should be done only by a qualified service person.
t. Remove back panel from dryer.
2. Avoid touching thermostats,
wires, terminals and heater box.
3. Remove lint from shaded area
- see art - with a soft brush or
vacuum cleaner.
4. Replace back panel. Recon-
nect, exhaust duct, etc.
Level the washer/dryer.
* Avoid electrical shock
hazard- unplug power
supply cord or turnoff
electrical power.
• Avoid injuryor damage-do not
put hands inside cabinet.
• Metal edges may be sharp.
• Make sure dryer iscool.
I hermostats IJ[IHeaterBox
Exhaust Duct Outlet
Heat Element Terminals
15
Loading ...
Loading ...
Loading ...