User Manual - Page 4

For H03-1020A. Also, The document are for others ZENY models: H03-1020A-G2

Loading ...
Loading ...
Loading ...
2.
Put in the detergent with the water in the tub a little less than halfway.
3.
Allow detergent to dissolve in the tub.
4. Turn the Wash Selector knob to the position of Wash.
5. Set the Wash Timer for one (1) minute to fully allow detergent to dissolve.
3
CIRCUIT DIAGRAM
OPERATING INSTRUCTIONS
WARNING:
to reduce the risk of fire or electric shock, only authorized personnel should perform repairs.
Operating Preparation:
1.
The AC outlet must be grounded.
2.
Lay down the drain pipe (discharge tube) to assure good discharging.
3.
Insert the plug into the AC outlet.
4.
Connect the water inlet tube into the water inlet point on machine to fill the water into the
washing tub. (Alternatively, you may lift the lid and carefully fill the tub directly from the
opening.)
WASHING POWDER (DETERGENT)
RECOMMENDED WASHING OPERATION CHART
The Standard of the Washing Time:
Load Capacity
Water Type
Water Level
Garment Type
6.6lbs (3kg) Standard
Polyester, Synthetics
Cotton (Natural Fibers)
Heavy Soiled Garments
Towels, Sheets
Based on type
of garment and
your desired
requirement
6.6lbs (3kg) Soft
Polyester, Synthetics
Cotton (Natural Fibers)
Heavy Soiled Garments
Towels, Sheets
Based on type
of garment and
your desired
requirement
1.
Prior to starting the washing operation, ensure the spin cycle basket has been removed from
tub. (The spin cycle basket is used after the wash and rinse cycles.
Loading ...
Loading ...
Loading ...