Loading ...
Loading ...
Loading ...
7
WARNING: Failure to follow the below instructions will damage the
heater and cause it to overheat.
Use of the support racks is optional. However, if you choose not to use
the support racks during the heat treatment, YOU MUST still ensure that
items in the Bedbug Toaster are at least 12 inches from the heat outlet.
Never put items under the bottom rack. Items placed under the bottom
rack will obstruct the air flow of the heater and cause severe damage to
the heater. Recommended clearance is 9 x 12 (in.) from the heat outlet.
5. The Bedbug Heater thermometer uses one 1.5V AAA battery. Locate the
battery compartment on the back of the remote and put in a new battery.
6. Put the thermometer sensor into the Bedbug Toaster™ through the opening
as indicated below. Connect the sensor wire to the thermometer. Hang the
thermometer on the top side of the Bedbug Toaster™ - as shown in Step Four.
Step One: Step Two:
Step Three: Step Four:
Loading ...
Loading ...
Loading ...