Loading ...
Loading ...
Loading ...
English
6
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can causeinjury.
Inserting and Removing the Battery Pack
from the Bluetooth® Speaker (Fig. B)
nOTE: Make sure your battery pack
15
is fullycharged.
To Install the Battery Pack into the Unit
1. Align the battery pack
15
with the rails inside the
speaker's battery port
11
(Fig.B).
2. Slide it in until the battery pack is firmly seated and
ensure that you hear the lock snap intoplace. Be sure
that it does not disengage.
To Remove the Battery Pack from
the Unit
1. Press the battery release button
12
and firmly pull the
battery pack out of the battery port.
2. Insert battery pack into the charger as described in the
charger section of thismanual.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
COMPONENTS (FIG. A)
Be sure to only use the power supply supplied with
thespeaker.
Intended Use
This speaker is designed for household use.
This Bluetooth® speaker is designed to play/stream audio via
a wireless Bluetooth® connection or wired connection to a
mobile phone or other audio device.
DO nOT use under wet conditions or in presence of
flammable liquids orgases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can causeinjury.
Instructions for Use (Fig. C)
WARNING: Always observe the safety instructions
and applicableregulations.
Power Button
1. To turn on the speaker, press the power button
1
.
2. To turn the speaker off, press the power button
1
.
Volume Adjustment
When the speaker is paired to a Bluetooth® device the
increase and decrease volume buttons
2
can be used to
increase or decrease volume on the audiodevice.
Track Change
When the speaker is paired to a Bluetooth® device the
right and left arrow buttons
3
can be used to skip or go to
previous tracks on the audiodevice.
Fig.C
1
2
3
Components
Tool Use
speaker household
optimal depth leaving approximately 7/32" (5.5 mm) of the
screw exposed. Align the slots on the back of the charger
with the exposed screws and fully engage them in theslots.
Versatrack
CRAFTSMAN chargers can be mounted to the wall using
CRAFTSMAN Versatrack Trackwall. Hooks and accessories
are sold separately. Please refer to the Versatrack Trackwall
accessory sheet for furtherinformation.
Fig.B
15
11
12
Loading ...
Loading ...
Loading ...