Loading ...
Loading ...
Loading ...
11
Cleaning After Use
1. Always ensure that the Speed
Control Dial is in the ‘OFF’ position
and that the power is switched
off at the power outlet then
remove the power cord from
the power outlet.
2. Remove the leaf beater, dough
hook or whisk attachment from
the Attachment Shaft on the
Mixer Head.
3. Remove the splash guard from
the Mixer Head.
4. Wipe the Mixer Head and Mixer
Stand with a soft, damp cloth
then dry thoroughly.
5. Wipe any excess food particles
from the power cord.
6. Wash the mixing bowl, splash
guard, leaf beater, dough hook
and whisk attachment in warm
soapy water with a soft damp
cloth. Rinse and dry thoroughly.
The mixing bowl can also be
washed in the dishwasher.
WARNING: Never immerse
the Bench Mixer, power
cord or plug in water or
any other liquid.
NOTE: Do not place any part
of the Bench Mixer except the
mixing bowl in the dishwasher.
Care, Cleaning and Storage
NOTE: Do not use abrasive
scouring pads or cleaners when
cleaning the mixing bowl, leaf
beater, dough hook and whisk
attachments as these may
scratch the surface. Ensure the
mixing bowl, leaf beater, dough
hook or whisk attachments
do not soak in water for an
extended period of time, i.e.
for several hours or overnight,
as this may damage the metal
finish. Do not wash or soak the
Mixer Stand in water or any
other liquid. Clean with a damp
cloth and dry thoroughly. Do
not allow water or any other
liquid to enter the gear system
as damage may result.
Storage
Your Kambrook Bench Mixer should be
kept in a convenient position on your
kitchen bench top or in an accessible
cupboard.
1. Always unplug your Kambrook
Bench Mixer from the power
outlet before storing.
2. Use the cord wrap on the bottom
of the Bench Mixer to easily store
the power cord.
3. Attach the mixing bowl to the
Mixer Stand.
4. Attach the splash guard to the
Mixer Head.
5. Place the leaf beater, dough hook
and whisk attachments inside the
mixing bowl and lower the Mixer
Head with the splash guard into
the horizontal position.
KSM500_IB_G15.indd 11 11/02/2015 9:27 am
Loading ...
Loading ...
Loading ...