Loading ...
Loading ...
Loading ...
13
Make sure the clock is set
to the correct time of day.
Using the clock, timer and convenience outlet.
Not all features are on all models.
To Set the Clock
To Set the Timer
The timer is a minute timer
only.
The OFF pad does not af-
fect the timer.
(on some mod-
els)
The clock must be set to the correct time
of day for the automatic oven timing func-
tions to work properly. The time of day
cannot be changed during a timed bak-
ing or self-cleaning cycle.
1. Touch TIMER pad and hold for 3 sec-
onds.
2. Touch the + or – pads.
If the + or – pads are not touched within
one minute after you touch the TIMER
pad, the display reverts to the original set-
ting. If this happens, touch the TIMER pad
and reenter the time of day.
3. Touch the START/ON pad until the time
of day shows in the display. This enters
the time and starts the clock.
To check the time of day when the display
is showing other information, simply touch
the TIMER pad. The time of day shows until
another pad is touched.
The timer does not control oven opera-
tions. The maximum setting on the timer is 9
hours and 59 minutes.
1. Touch the TIMER pad.
2. Touch the + or – pads until the amount
of time you want shows in the display.
The maximum time that can be entered
in minutes is 59. Times more than 59 min-
utes should be changed to hours and
minutes.
If you make a mistake, touch the TIMER
pad and begin again.
3. Touch the START/ON pad. The time will
start counting down, although the dis-
play does not change until one minute
has passed.
4. When the timer reaches :00, the control
will beep 3 times followed by one beep
every 6 seconds until the TIMER pad is
touched.
TIMER
START
MINUTERIE
TIMER
START
MINUTERIE
Safety Instructions
Operating
Instructions
Care and Cleaning
Troubleshooting Tips
Consumer Support
Installation
Instructions
Loading ...
Loading ...
Loading ...