Loading ...
Loading ...
Loading ...
CYCLE CONTROL KNOB
LIGHT WASH Cycle
For normal, everyday soiled loads.
Cycle time is about 60 minutes
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time
is about 10 minutes.
Use AIR DRY only
HEAT DRY or AIR DRY?
If the HEAT DRY Option isselected, air in the
dishwasher is heated during the "dry" part of
the cycle
If the AIR DRY Option is selected, air in the
dishwasher isnot heated. Using this option helps
save energy, but dishes take longer to dry (over-
night) and some water spotting may result.
Some items (such as plastics) may need towel
drying.
For best results, use a solid rinse aid.
Changing a setting
You can change a setting anytime during
any cycle.
1. Liftup on the door latch to unlatch the door
and stop the cycle. Don't open the door until
the spray arms stop spinning.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
3. Be sure the detergent dispensers are filled
properly for the new cycle.
4. Press door firmly to latch it. The dishwasher
will automatically start the new cycle.
To add a dish after starting
1. To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob
has not passed LIGHT.
2. Lift up on the door latch to unlatch door to
stop the cycle. Don't open the door until the
spray arms stop spinning.
3. Open the door and add the dish.
4. Close the door Do not latch it. Wait 30 sec-
onds for air in the dishwasher to warm up. This
helps reduce the amount of moisture that
can come from the vent when restarting the
cycle.
5. Press door firmly to latch it. The dishwasher
will automatically start where it stopped
Loading ...
Loading ...
Loading ...