Loading ...
Loading ...
Loading ...
en Basic operation
32
3. Briefly pull on the mains power
supply cord and then let go.
a The power cord retracts automatic-
ally.
Controlling the power
1
You can control the setting continu-
ously.
1. Turn the power control to the re-
quired setting.
→Fig.
2. Turn the telescopic tube with air
flow regulator to the required posi-
tion.
→Fig.
a The power is controlled continu-
ously.
Setting the floor tool
Use the switch to set the floor
nozzle to the required base.
→Fig.
Parking the appliance
Tip:When taking shorter breaks from
vacuuming, the floor nozzle can be
placed in the parking aid.
Slide the hook on the floor nozzle
into the parking aid.
→Fig.
Stopping and carrying the ap-
pliance
1. Switch off the appliance.
→"Switching off the appliance",
Page31
2. Stand the appliance upright on its
end.
3. Slide the hook on the floor tool into
the parking aid.
→Fig.
4. To overcome obstacles, carry the
appliance by the handle.
Vacuuming with accessory
1. Place the required nozzle onto the
telescopic tube or the handle.
2. After use, take the nozzle that is
used from the telescopic tube or
remove from the handle.
Vacuuming with the Multi-
Use-Brush
1
Note:Do not remove the Multi-Use-
Brush after use. The suction power is
not restricted by the fitted Multi-Use-
Brush.
ATTENTION!
Vacuuming without the bristle ring
pushed down can damage the sur-
face.
Never vacuum with the bristle ring
pushed up.
1. Push the Multi-Use-Brush onto the
handle or the tube and lock it in
place.
→Fig.
2. Press the two locking catches on
the bristle ring.
3. Push the bristle ring down and
lock it in place.
→Fig.
a The Multi-Use-Brush is ready to
use.
4. Vacuum using the Multi-Use-Brush.
5. Press the two locking catches on
the bristle ring.
6. Push the bristle ring upwards and
lock it in place.
→Fig.
7. Push the floor tool or the tube onto
the Multi-Use-Brush.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...