Loading ...
Loading ...
Loading ...
REFRIGERATOR USE
In order to ensure proper temperatures, you need to permit air to
flow between the two sections. Cold air enters the bottom of the
freezer section and moves up. It then enters the refrigerator
section through the top vent. On Style 2 models, this air is also
evenly distributed throughout the refrigerator compartment
through six vents on the back wall. Air then returns to the freezer
as shown.
Style 1 Style 2
/
Do not block any of these vents with food such as soda, cereal,
bread, etc. If the vents are blocked, airflow will be obstructed and
temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To avoid odor
transfer and drying out of food, wrap or cover foods tightly.
ds ,7tt/e
Your model may have Rotary Controls or Slide Controls.
IMPORTANT:
• Your refrigerator will not cool when the Refrigerator Control is
set to OFF.
The Refrigerator Control adjusts the refrigerator compartment
temperature. The Freezer Control adjusts the freezer
compartment temperature. Higher numbered settings make
the compartment colder. Lower numbered settings make the
temperature less cold.
• Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.
NOTE: Adjusting the Refrigerator and Freezer Controls to a
higher (colder) setting will not cool the compartments any
faster.
• The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
• If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
For your convenience, your controls are preset at the factory.
When installing your refrigerator, make sure that the controls are
still at the set points as shown.
Rotary Controls
FREEZER REFRIGERATOR
I !
2 3 , 3 4 ,
I' " 2@
COLD _ COLDER COLD 1 _6 COLDER
Slide Controls
Freezer Refrigerator
C )
cold I 2 = 3 4 colder off I 2 A 3 4 colder
Adjusting Controls
NOTE: Wait at least 24 hours between adjustments and then
recheck the temperatures.
If you need to adjust temperatures, adjust the refrigerator
temperature first.
Rotary Controls
Turn the control right (clockwise) to make the compartment
colder. Turn the control left (counterclockwise) to make it less
cold.
Slide Controls
Slide the control one setting to the right to make the
compartment colder. Slide the control one setting to the left to
make it less cold.
CONDITION/REASON: SETTING
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR
- Not set correctly for your Control one setting
conditions lower
REFRIGERATOR too warm REFRIGERATOR
- Door opened often, large amount Control one setting
of food added or room temperature higher
very warm
FREEZER too cold FREEZER Control one
- Not set correctly for your setting lower
conditions
FREEZER too warm/too little ice FREEZER Control one
- Door opened often, or large setting higher
amount of food added or very cold
room temperature (can't cycle often
enough) or heavy ice usage
Depending on your model, you may have one or more of the
following options: the ability to select either crushed or cubed
ice, a special light that turns on when you use the dispenser, or a
lock option to avoid unintentional dispensing.
10
Loading ...
Loading ...
Loading ...