Kenmore 79551089010 Elite refrigerator

User Manual - Page 9

For 79551089010.

PDF File Manual, 33 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ElectricShockHazard
Disconnect electrical supply to the refrigerator
before installing. Failure to do so could result in
death or serious injury.
Do not put hands, feet or other objects into the
air vents, base grille, or bottom of the refrigerator.
You may be injured or receive an electrical shock.
Be careful when you work with the hinge, base
grille, and stopper. You may be injured.
REMOVING AND REPLACING
REFRIGERATOR DOORS
Before removing the doors, remove the base grille.
See BASE GRILLE INSTALLATION for reference.
Removing the left (freezer) door with water line
connection.
Pull up the water feed tube while pressing area
(Figure 1) as shown in the figure below.
NOTE: If a tube end is deformed or abraded, trim the
part away. Disconnecting the tube under the door
causes about 0.13 gallons (0.5 liters) water to
flow out. Put a large container at end of tube to
prevent water from draining onto the floor.
Figure 1
To remove the right (refrigerator) door:
S %
.........../2 _q
(3)/(4) ,
Type 1 i(4y (a)__;
; Type 2 ;
i
1. Open the door. Remove the top hinge cover screw
(1).
2. Use a flat blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet (2). Lift up the cover.
3.Rotate the hinge lever (3) clockwise. Lift the top hinge
(4) free of the hinge lever latch (5).
NOTE: Regardless of hinge lever type, removal process is
the same.
4. Lift the door from the lower hinge pin.
5. Place the door, inside facing up, on a nonscratching
surface.
CAUTION: When lifting the hinge free of the latch,
be careful that the door does not fall forward.
(1)\
(2)
(5) _7)
,_<._ /(7)
// (6)_'<__
Rivet/ "1\.._/_
,Type 2
1. Open the door. Remove the top hinge cover screw (1).
2. Use a flat blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet (2). Lift up the cover.
3. Disconnect all the wire harnesses (3).
4. Remove the grounding screw (4).
5. Rotate hinge lever (5) counterclockwise. Lift the top
hinge (6) free of the hinge lever latch (7).
NOTE: Regardless of hinge lever type, removal process is
the same.
CAUTION: When lifting the hinge free of the latch,
be careful that the door does not fall forward.
6. Lift the door from the lower hinge pin being careful to
pull the water lines through the lower hinge pin.
7. Place the door, inside facing up, on a nonscratching
surface.
Loading ...
Loading ...
Loading ...