11075132411 Use & Care Guide

Loading ...

3. Select the desired cycle

O_F 6O Timed Dry

40 MIN

WRINKLE GUARD 40

Auto Moisture 30

Sensing 2o - TouchUp

Less

Normal

Mor_

OFF

OFF 10 20 30

Air Oniy

Select the desired cycle for your load. See the "Cycle Guide"

for more information about each cycle.

Auto Moisture Senslng TM cycles

You can select a different dry level, depending on your load,

by turning the knob to More, Normal, or Less.

Selecting More, Normal, or Less automatically adjusts the

dryness level at which the dryer will shut off:. Once a dry level

is set, it cannot be changed without stopping the cycle.

Auto Moisture Sensing TM cycles give the best drying in the

shortest time. Drying time varies based on fabric type, load size,

and dryness setting.

NOTE: More Dry removes more load moisture. Normal Dry is

used for a starting point for Auto Moisture Sensing TM cycles.

Choose normal to save energy. Less Dry removes Jess moisture

and used for loads you may want to put on a hanger to

complete drying.

4. Set cycle options

Off On

Medium

Casual

Low • High

Delicates Cotton

@ @

Wrinkle Guard Dry Temp

Select the cycle options by turning the knob to the desired

position.

NOTE: Not all options and settings are available with all cycles.

Wrinkle Guard TM option

Get up to 40 minutes of heat-free, periodic tumbling at the end

of a cycle. Turn the WRINKLE GUARD TM knob to select ON or

OFF at any time before the cycle has ended.

Dry Temp

Turn the DRY TEMP knob to change the drying temperature

setting. See "Setting the Drying Temperature."

f_5. Select Cycle Signal, if desired

CYCLESIGNAL

Off On

Push to Start

Turn the CYCLE SIGNAL knob to select the desired setting (On

or Off:). The Cycle Signal produces an audible sound when the

drying cycle is finished. Promptly removing clothes at the end

of the cycle reduces wrinkling.

NOTE: When the Wrinkle Guard TM option is selected and the

Cycle Signal is on, the tone will sound every 5 minutes until the

clothes are removed, or the Wrinkle Guard TM option ends.

6. Press and hold PUSH to START

to begin cycle

CYCLE SIGNAL

Off On

Push to Start

Press and hold the PUSH to START button to begin the cycle.

Promptly remove items after cycle has completed to

reduce wrinkling. Use the Wrinkle Guard TM option to avoid

wrinkling when you are unable to remove a load from the

dryer as soon as it stops.

Loading ...

Use & Care Guide - Page 8