Loading ...
Loading ...
Loading ...
11
10m
1L
3x
MAX
MIN
MAX
MIN
90d
SHAKE FILTER
NEW FILTER
3s
3 beeps will sound and the water droplet light
will flash continuously in red.
10m
1L
3x
MAX
MIN
MAX
MIN
90d
SHAKE FILTER
NEW FILTER
3s
1. Lift the water tank from the purifier, remove
the lid and set aside. Lifting by the ring,
remove the filter cartridge from the filter
holder and discard any remaining water
inside the water tanks, then separate the
upper tank from the lower tank.
10m
1L
3x
MAX
MIN
MAX
MIN
90d
SHAKE FILTER
NEW FILTER
3s
2. Remove the new filter cartridge from
its packaging
NOTE
It is normal for the filter to appear moist
when removed from its wrapping. This
is condensation from the hygienic steam
sterilisation process.
10m
1L
3x
MAX
MIN
MAX
MIN
90d
SHAKE FILTER
NEW FILTER
3s
3. Immerse the filter in a bowl of tap water and
gently shake until there are no air bubbles.
Soak filter in the tap water for 10 minutes.
10m
1L
3x
MAX
MIN
MAX
MIN
90d
SHAKE FILTER
NEW FILTER
3s
4. Once soaked, insert the filter into the filter
holder of the upper tank and push down
firmly to secure in place.
NOTE
Make sure the filter is tightly fitted. If the filter
is not pressed in tightly, unfiltered tap water
may flow around the filter into the lower water
tank, or the filter may float up.
10m
1L
3x
MAX
MIN
MAX
MIN
90d
SHAKE FILTER
NEW FILTER
3s
5. Place the upper tank into the lower water
tank.
10m
1L
3x
MAX
MIN
MAX
MIN
90d
SHAKE FILTER
NEW FILTER
3s
6. To flush and activate the new filter
cartridge, add 1L of water to the upper water
tank, allowing the water to filter through.
Remove the water tanks and discard the
collected water. Repeat this step once more
so the filter is fully flushed with 2L of water
before use.
10m
1L
3x
MAX
MIN
MAX
MIN
90d
SHAKE FILTER
NEW FILTER
3s
7. Once flushed, fill the water tank with tap
water up to the MAX line.
Loading ...
Loading ...
Loading ...