Loading ...
Loading ...
Loading ...
7-86
Maintenance
✽✽
NOTICE - Matte paint finish
vehicle (if equipped)
Automatic car wash which uses
rotating brushes should not be used
as this can damage the surface of
your vehicle. A steam cleaner which
washes the vehicle surface at high
temperature may result the oil to
adhere and leave stains that is diffi-
cult to remove.
Use a soft cloth (e.g. microfiber
towel or sponge) when washing your
vehicle and dry with a microfiber
towel. When you hand wash your
vehicle, you should not use a cleaner
that finishes with wax. If the vehicle
surface is too dirty (sand, dirt, dust,
contaminant, etc.), clean the surface
with water before washing the car.
✽✽
NOTICE - Matte paint finish
vehicle (if equipped)
Do not use any polish protector such
as a detergent, an abrasive and a
polish. In case wax is applied,
remove the wax immediately using a
silicon remover and if any tar or tar
contaminant is on the surface use a
tar remover to clean. However, be
careful not to apply too much pres-
sure on the painted area.
Finish damage repair
Deep scratches or stone chips in the
painted surface must be repaired
promptly. Exposed metal will quickly
rust and may develop into a major
repair expense.
✽✽
NOTICE
If your vehicle is damaged and
requires any metal repair or
replacement, be sure the body shop
applies anti-corrosion materials to
the parts repaired or replaced.
✽✽
NOTICE - Matte paint finish
vehicle (if equipped)
In case of matte paint finish vehicles,
it is impossible to modify only the
damaged area and repair of the
whole part is necessary. If the vehi-
cle is damaged and painting is
required, we recommend that you
have your vehicle maintained and
repaired by an authorized retailer of
Genesis Branded products. Take
extreme care, as it is difficult to
restore the quality after the repair.
• Wiping dust or dirt off the
body with a dry cloth will
scratch the finish.
• Do not use steel wool, abra-
sive cleaners, or strong deter-
gents containing highly alka-
line or caustic agents on
chrome-plated or anodized
aluminum parts. This may
result in damage to the pro-
tective coating and cause dis-
coloration or paint deteriora-
tion.
CAUTION
Loading ...
Loading ...
Loading ...