Loading ...
Loading ...
Loading ...
Troubleshooting
40 En
Disc
USB devices
The iPod does not charge up.
The iPod is not connected properly. Reconnect the iPod to the USB jack (& P.15).
The iPod is not supported by this unit. Use a supported iPod (& P.43).
The unit is in the eco standby mode. Set [Power Saving] to [Normal] with the option setting (& P.12).
Problem Cause Solution
Problem Cause Solution
Playback does not start after a disc is set.
Some button operations do not work.
The disc set into the unit may not be compatible. Use a disc supported by the unit (& P.43).
Playback does not start immediately after
pressing on the unit or on
the remote control (stops immediately).
The disc may be dirty. Wipe the disc clean (& P.43).
The disc set in the unit may not be supported. Use the disc supported by the unit (& P.43).
If the unit was moved from a cold to warm place, condensation may have
formed on the disc reading lens.
Wait for an hour or two until the unit adjusts to the room temperature, and
try again.
Problem Cause Solution
The unit does not detect the USB device.
The USB device is not connected to the USB jack securely.
Turn off the unit, reconnect your USB device, and turn the unit on again
(& P.15).
The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format.
Folders and files in the USB device cannot
be viewed.
The data in the USB device is protected by the encryption. Use a USB device without an encryption function.
Loading ...
Loading ...
Loading ...