Loading ...
Loading ...
Loading ...
7
IDENTIFYING EXTERNAL COMPONENTS
Front Panel
The figure below shows the front panels of the DES-1005P.
Figure 1. Front panel
Power LED Indicator:
This green indicator light is on when the DES-1005P is receiving
power; otherwise, it is off.
Ethernet Ports (Port 1~5):
These ports support network speeds of either 10Mbps or 100Mbps,
and can operate in half- and full- duplex transfer modes. These
ports also support automatic MDI/MDIX crossover detection,
which gives the Switch true, “plug and play” capabilities. Just
connect any network cable between the Switch and the device,
and The Switch will automatically detect the settings of the
device and adjust itself accordingly.
PoE Port (Port 1 only):
The PoE port will automatically activate when a compatible
terminal is identified. The Switch will supply power through the
Ethernet port to the connected PoE device.
For legacy devices that are not compatible, the PoE port will not
offer the power to this device. This feature allows users to freely
and safely mix legacy and PoE compatible devices on the network.
Loading ...
Loading ...
Loading ...