User Manual C150 VectorFog

• Owner's manual - (English)

Table of contents

• VECTOR FOG. P>
• VECTOR FOG

VECTOR FOG. P>

01. SAFETY PRECAUTIONS

• Ensure that the machine is connected to the right power supply. Plugging the machine to the wrong voltage. could cause the motor to overheat and

+ DO NOT CONNECT 220V TO A 110V POWER SUPPLY.

+ DO NOT CONNECT 110V TO A 220V POWER SUPPLY.

• If you need to replace the fuse. please use a 15 amp fuse with the correct

FUSE

• Do not move the fogger by pulling it by the power cord

• Unplug from power supply when not in use and before servicing or cleaning.

• Do not operate with a damaged cord or plug. after a malfunction. or if it's dropped or damaged. Return appliance to the nearest authorized service centre for repair.

VECTOR FOG

PRODUCT GUIDANCE

1. Please do not overfill the solution tank more than the following suggested amount:

C20: 2.0L (less than 4 jugs of 500ml) C100+: 4.0L C150+: 6.0L

2. This machine is not for fogging any powder based solutions; these can cause blockages and damage to the machine.

Only use solutions between the pH levels of 3 and 10.

3. Please do not lay the machine on the left side. right side or upside down. Always keep the machine upright.

If not. the solution might flow into the motor area and cause a short circuit. which shortens the lifespan of the motor.