Loading ...
Loading ...
Loading ...
7
REVERSING THE DOOR SWING OF YOUR APPLIANCE
This unit has the capability of the door opening from either the left or right side. The unit is delivered to
you with the door opening from the left side. Should you desire to reverse the opening direction, please
follow the following reversal instructions.
NOTE: All parts removed must be saved to allow the door swing to be reversed.
1. Open the door and remove the two lock screws (1) under the right bottom corner of the door that are
used to hold the lower door hinge (2) to the door shaft assembly (3). Be sure to support the door firmly
to prevent it from dropping after removing the screws. (Fig. 1)
2. Pull down to remove the door and place it on a padded surface to prevent scratching.
3. Remove the door axle (4) from the right upper hinge, then install and tighten it in the left upper hinge.
(Fig. 2)
4. Remove the lower door hinge (2) and install it at the designated position on the left side. (Fig. 3)
5. Set the door at the designated position and install the two screws (1) to connect the door shaft
assembly (3) with the lower door hinge (2). Tighten them before the door is leveled.
6. Remove the handle from the left side of the door and install it on the right side. (See next section.)
Loading ...
Loading ...
Loading ...