Loading ...
Loading ...
Loading ...
44D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual
Section 3 - Conguration
Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your
computers. If enabled, your computers will use Covr Point A for a
DNS server.
DHCP Server
Status: Enable or disable the DHCP server.
DHCP IP Address
Range:
Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note: If you have reserved static IP addresses to client devices, make
sure the IP addresses are outside of this range or you might have an IP
conict. Refer to Connected Clients section page 15 for how reserve
IP addresses for clients.
DHCP Lease Time: Enter the length of time for the IP address lease (in minutes).
Always Broadcast: Enable this feature to broadcast your network's DHCP server to LAN/
WLAN clients.
Advanced Settings
WAN Port Speed: You may set the port speed of the Internet port to 10 Mbps, 100
Mbps, 1000 Mbps, or Auto (recommended).
UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP provides
compatibility with networking equipment, software, and peripherals.
IPv4 Multicast
Streams:
Enable to allow IPv4 multicast trac to pass through Covr Point A
from the Internet.
IPv6 Multicast
Streams:
Enable to allow IPv6 multicast trac to pass through Covr Point A
from the Internet.
Click Save when you are done.
Network (Continued)
Loading ...
Loading ...
Loading ...