Loading ...
Loading ...
Loading ...
Assembly
1. Assemble the base (14) to the adjustable pipe (12) by holding the base on it's
side, and inserting the pipe into the centre. Secure the pipe (12) to the base (14)
with the supplied 19mm bolt & washer (15). Firmly tighten with a 19mm spanner
(not supplied).
2. To assemble the fan motor (8) to the adjustable pipe (12) locate the motor xing
hole (10) and align with the adjustable pipe xing hole (11). To secure the fan
motor to the adjustable pipe, use the long bolt & washer (supplied) and push
through the hole. Tighten the bolt well.
3. Align the rear grille (5) to motor shaft (6) on the fan motor (8) and ensure the
hole for the safety screw is at the bottom. The 4 screw holes on the front of the
fan motor (8) should line up. Firmly tighten all four rear grille screws (4).
4. Once the rear grille (5) is attached to the fan motor (8), turn the motor shaft
(6) so the at area is at the top. Slide the fan blade (3) all the way onto the
motor shaft (6) and rmly tighten the grub screw (2) by rotating in a clockwise
direction.
5. Once the fan blade is xed, align the top locking clip on the front grille (1) so it
xes to the that of the rear grille (5). Lock the side and bottom clips in place.
TIP: the logo should be horizontal. Secure the front & rear grille, by inserting and
xing the safety screw (16) and nut.
1. Ensure the rotary switch (9) is in the '0' position, prior to connecting the plug to
the power supply.
2. Switch the fan ON by rotating the rotary switch (9) on the back of the fan motor
(8) to the desired setting - 1, 2 or 3. Turn to the '0' position to turn OFF.
3. To start oscillation, press the oscillation On/O switch (7) to the 'I' position. To
turn oscillation o, press to 'O' position.
4. The airow direction can be adjusted upward/downward by lifting up or pressing
down the motor housing.
NOTE: Only adjust the fan head when the unit is OFF. Be careful not to insert your
ngers through the guard.
Operation
14. Base
8. Fan motor
11. Adjustable pipe xing
hole & long bolt & washer.
9. Rotary switch
7
Loading ...
Loading ...
Loading ...