Loading ...
Loading ...
Loading ...
Unpack the carton, remove the foam, and lay the monitor flat on the table.
Keep the foam under the monitor until you install the stand.
5
4. After assembly, simply hold the stand with hand to stand the monitor upright.
3. Press and hold the quick release button with your fingers to remove the base stand assembly.
Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid
damage to the screen.
Installation of base
1. Take out the base and bracket and tighten them with screws.
Take out the shaft assembly and lock it with the base of the bracket with screws.
2. Remove the upper foam cover (note: the machine cannot leave the lower foam cover).
Use the assembled base bracket assembly to align the slot of the machine and buckle down .
(note: press and hold the quick release button with your fingers to take out the base bracket assembly).
Tighten with three screws
Tighten with two screws
Do not press the LCD
Loading ...
Loading ...
Loading ...