Loading ...
Loading ...
Loading ...
6
www.aeg.com
CAUTION:
- In order to avoid a hazard due to inadvertent reset-
ting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
ELECTRICAL CONNECTION
• Check that the installation complies with standards of
local gas and electricity authorities.
• If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly
qualied person in order to avoid a hazard.
• Ensure that the plug is accessible after installation.
ACCESSORIES
• When using exible duct always install duct with the
wire helix pulled taut to minimise pressure loss.
• Try to keep exhaust duct short and straight.
• Keep bends in the exhaust duct to a minimum.
• Do not restrict exhaust duct.
• Reducing the size of the exhaust duct will reduce the
airow of the rangehood. Please read instructions care-
fully. Service calls resulting from incorrect installation
will be charged for.
• Installation must comply in all respects with your gas
and electrical authorities. This rangehood is an indoor
domestic appliance, and has been manufactured and
tested to comply with Australian and New Zealand
Standard AS/NZS 60335.2.31
Loading ...
Loading ...
Loading ...