Furrion FCR08DCGTA-BR Arctic DC Refrigerator

User Manual - Page 14

For FCR08DCGTA-BR. Also, The document are for others Furrion models: FCR08DCGTA-BL, FCR10DCGTA-BL, FCR10DCGTA-BR, FCR08DCGTA-NR, FCR08DCGTA-NL, FCR08DCGTA-KR, FCR08DCGTA-KL, FCR10DCGTA-NR, FCR10DCGTA-NL, FCR10DCGTA-KR, FCR10DCGTA-KL

PDF File Manual, 19 pages, Read Online | Download pdf file

FCR08DCGTA-BR photo
Loading ...
Loading ...
Loading ...
14
Cleaning and Maintenance
Refrigerator Interior Cleaning
It is recommended to clean the interior as needed due to
spills and other cleaning needs, or each time a new charcoal
filter is replaced.
Refrigerator Exterior Cleaning
To maintain good appearance of your refrigerator, it is
recommended to clean it regularly.
Mix together one to two tablespoon of baking soda and
one quart of water. Wipe down the walls and glass doors of
the refrigerator with this solution, then rinse it with water.
Wipe the refrigerator dry. Avoid using abrasive cleaners and
scrubbing pads or they will damage the refrigerator surfaces.
Battery Maintenance
Your refrigerator has an automatic shut-off switch, should the
voltage drop below 9.6V at the terminal connection. This is to
help prevent permanent damage to your batteries.
NOTE: Once voltage is re-established the refrigerator will
begin working automatically per the setting of the dial.
When possible maintain the float voltage listed on your
battery. Solar is a good way to maintain battery voltage if
a local power source is not available. Contact Furrion for
further questions or options on Solar.
Replacing the Interior LED
WARNING
Electric Shock Hazard
Remove power to the refrigerator by turning off the
converter, disconnecting the battery main, or pulling the
fuse. Failure to do so may result in electrical shock or
personal injury.
Before removing the LED, turn the refrigerator temperature
control to the OFF position. Replace the old LED with a new
LED of the same wattage and size. Contact Furrion or Furrion
authorized dealer to purchase a genuine Furrion replacement
LED (C-FCR10DCDTA-S01).
1. Unscrew the three screws (Fig. 23)
Fig. 23
2. Press the cover backwards toward the rear of the unit and
open it. (Fig. 24)
Fig. 24
3. Remove the clip and two screws to replace the old LED
with a new LED. Fix the clip and tighten the screws. Then
reinstall the cover. (Fig. 25)
Fig. 25
Replacing the Charcoal Filter
It is recommended to replace the charcoal filter every
three months of active use. Contact Furrion or Furrion
authorized dealer to purchase the replacement charcoal filter
(C-FCR10DCDTA-B01).
Replace the charcoal filter by pulling it out from the
refrigerator as shown in Fig. 26 and replace with a new one.
Fig. 26
Loading ...
Loading ...
Loading ...