Loading ...
Loading ...
Loading ...
• Make sure to apply Teflon tape evenly
• When tightening the hex nut with a wrench, make sure that other parts are not
turning with it.
• After the filteris installed,carefully observe whether there is water leakage at the
joints.
PRODUCT INSTRUCTIONS
• After installation, open the inlet water main valve to perform a flush.
• Before flushing, ensure that there is a reliable drainage system. You can also
flush the drain water in to a suitable container.
• Simply turn the ball valve knob counterclockwise by 90°, then turn the scraper
knob clockwise or counterclockwise for 3 to 4 times to clean and drain the filter
housing.
• Depending on the quality of the incoming water, flush at least once a month, and
toggle the ball valve switch 3 times, flushing for 30 seconds each time.
• Clean the filter cartridge after it has been used continuously for 8-12 months. We
recommend that it be cleaned by professional maintenance personnel.
DISASSEMBLING THE FILTER CARTRIDGE
• If normal scraping or rinsing cannot remove the buildup on the filter
mesh hence affecting water output, we recommend removing the filter
assembly.
• Unscrew the filter housing counterclockwise using the included
wrench
• Remove the filter assembly and clean the filter mesh
Note: No need to remove the scraping assembly if only cleaning the filter
assembly.
Loading ...
Loading ...
Loading ...