Loading ...
Loading ...
Loading ...
9
ELECTRICAL DIAGRAM
+ to + and - to -
positive to positive / negative to negative
(red wire) / (black wire)
THIS FRIDGE MUST NEVER BE CONNECTED DIRECTLY
TO ANY AC (alternating current) POWER SOURCE!
THE FRIDGE MUST ONLY BE CONNECTED TO A 12V OR 24V DC
POWER SOURCE, SUCH AS A SOLAR
BATTERY SYSTEM OR CHARGE CONTROLLER.
THE FRIDGE WILL AUTOMATICALLY OPERATE ON EITHER 12V OR
24V DC. THE USER DOES NOT NEED TO MAKE ANY ADJUSTMENT.
ATTENTION: Polarity is important in wiring this DC appliance. Be
sure that the positive terminal of the battery or charge controller
coincides with the positive wire to the compressor, and the nega-
tive terminal of the battery or charge controller coincides with the
negative wire to the compressor. The leads should be connected
using cable shoes and screwed connections. Joined leads should be
avoided.
DC POWER CONNECTION
日 期
出图审查
设计
校对
工艺
标准
审定
日期
图形识别符号
杭州金松优诺电器有限公司
BCD261LHSUN(E1).00-17
图纸样式
A4
重量(g)
比 例
1:1
共 张 第 张
标记
处数
文 件 号
签 字
日
期
A
B
C
D
E
1 2 3 4
重要度
电路图铭牌
80g铜版纸
技术要求
1.印刷清晰,全部采用黑色,按电子文档制作。
2.符合欧盟ROHS要求。
3. 背面带胶尺寸大小为:152.5X152.5mm,表面覆膜, 。
4.打样后须经设计人员确认。
5.保留边料，上面印“ ”字样 BCD261LHSUN(E1) 。
徐 勤
2018-1 2-1 5
袁小冬
包相辉
张 颖
BCD261LHSUN(E1).00-17
152 mm
102 mm
BLUE
DC12V/24V
UGP-275 L R
UGP-275 L R
Loading ...
Loading ...
Loading ...