Loading ...
Loading ...
Loading ...
5
IMPORTANT SAFETY INSTRUCTIONS
Before this fridge is used, it must be properly positioned and installed as
described in this manual. Please read this manual carefully. To reduce the risk of
fire, electrical shock or injury when using the appliance, follow basic precautions,
including the following:
• Always plug into a grounded 3-prong outlet. Do not remove grounding prong,
do not use an adapter, and do not use an extension cord.
• Do not use if the power supply cord is damaged. If damaged, do not use the
appliance. Contact customer service immediately.
• It is recommended that a separate circuit (serving only your appliance) be
used for this fridge. Use receptacles that cannot be turned off by a switch or
pull chain.
• Never clean appliance parts with flammable fluids or harsh chemicals. These
fumes can create a fire hazard or explosion.
• Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this fridge or any other appliance.
• Before proceeding with cleaning and maintenance operations, make sure to
unplug the appliance.
• Do not connect or disconnect the power cord with wet hands.
• Do not attempt to repair or replace any part of your appliance unless it is
specifically recommended in this manual. All other servicing should only be
recommended by NewAir. Contact customer service if you have any issues
arise with your fridge.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN
APPLICABLE TO YOUR MODEL
• Use two or more people to move and install the fridge. Failure to do so can
result in injury.
• To ensure proper ventilation for your fridge, the front must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F
(16°C) and below 90°F (32°C). This fridge must be installed in an area
protected from wind, rain, or water spray of any kind.
• This fridge should not be placed next to ovens, grills or similar sources of heat.
• This fridge must be installed with all electrical connections in accordance with
state and local codes.
• The fuse (or circuit breaker) size should be 15 amperes.
Loading ...
Loading ...
Loading ...