Craftsman 917377981 rotary lawn mower

User Manual - Page 7

For 917377981.

PDF File Manual, 30 pages, Download pdf file

Loading ...
Loading ...
Loading ...
The operation of any lawn
mower can result in foreign
objects thrown into the eyes,
which can result in severe eye damage.
Always wear safety glasses or eye shields
while operating your lawn mower or
performing any adjustments or repairs.
We recommend a wide vision safety mask
over spectacles or standard safety
glasses.
HOWTO USEYOUR LAWN MOWER
ENGINESPEED
The engine speed was set at the factory
for optimum performance. Speed is not
adjustable.
ENGINE ZONE CONTROL
&CAUTION: Federal regulations
require an engine control to be installed
on this lawn mower in order to minimize
the risk of blade contact injury. Do not
under any circumstances attempt to
defeat the function of the operator control.
The blade turns when the engine is
running.
Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start and
operate the lawn mower.
TO ADJUST CUTTING HEIGHT
Raise wheels for low cut and lower wheels
for high cut.
Adjust cutting height to suityour require-
ments. Medium position is best for most
lawns.
To change cutting height, squeeze adjuster
lever toward wheel. Move wheel up or
down to suit your requirements. Be sure all
wheels are in the same setting.
NOTE: Adjuster is properly positioned
when plate tab inserts into hole in lever.
Also, 9-position adjusters (if so equipped)
allow lever to be positioned between the
plate tabs.
Plate Tab
LowerWheels for HighCUtr..._=_
@
Raise Wheels for Low Cut
TO ATrACH GRASS CATCHER
Close the lifttop lid. Lifttop lidmust be
closed while operating lawn mower.
Liftthe rear door on the mower housing
and place the grass catcher frame ontothe
formed tabs on the rear door hinge
bracket.
The grass catcher is secured to the lawn
mower housing when the rear door is
lowered onto the grass catcher frame.
CAUTION:
. Do not run your lawn
mower without clipping deflector or
approved grass catcher in place. Never
attempt to operate the lawn mower with
the rear door removed or propped open.
Hinge "_-_
Rear door
Grass catcher
frame
Formed
tabs
TOEMPTYGRASSCATCHER
To remove grass catcher, release operator
presence control bar to stop engine.
Liftup rear door and remove the grass
catcher by the handle.
NOTE: Do not drag the bag when
emptying; it will cause unnecessary wear.
7
Loading ...
Loading ...
Loading ...