Loading ...
Loading ...
Loading ...
5
OPTIONS CAN BE
SELECTED
WITH
WHAT IT DOES ADDED TIME TO CYCLE ADDED
WATER
GALLONS
(LITERS)
TYPICAL MAX
Raises main wash temperature to improve
cleaning for loads containing tough,
baked-on food.
Heavy
Normal
Raises main wash
temperature from
105°F (41°C) to
135°F (54°C).
35 45 0 to 3.7
(0 to 14.0)
Dries dishes with heat. This option, with the
use of rinse aid, will provide the best drying
performance. Plastic items are less likely to
deform when loaded in the top rack. Use
Heat Dry for optimum drying performance
or turn the Heat Dry option off for air dry.
Available with
any cycle
Uses heating
element and vents
to speed drying
times. Heat Dry
option defaults to On
when any cycle is
selected, except for
1 Hr Wash.
52 52 0
Runs dishwasher at a later time. Select a
wash cycle and options. Press 4 HR DELAY.
Press START/RESUME. Close door firmly.
NOTE: Anytime door is opened (such as, to
add a dish), Start/Resume must be pressed
again to resume delay countdown.
Available with
any cycle
Delays start of a
cycle up to 4 hours
.
240 240 0
Control
Lock
Avoids unintended use of dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Control Lock, press and hold 4 HR DELAY for 3 seconds. The Control Lock light will stay on for a short time, indicating
that it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked, the light flashes 3 times.
The dishwasher door can still be opened/closed while the controls are locked.
To turn off Control Lock, press and hold 4 HR DELAY for 3 seconds. The light turns off.
NOTE: If your model requires you to press and hold 4 HR DELAY to lock controls, the control locked LED will be on or off to indicate
whether the Control Lock is active or not.
Control Purpose Comments
Press to start or
resume a wash
cycle.
If the door is opened during a cycle or the power is interrupted, the Start/Resume button LED flashes. Cycle
will not resume until door is closed and Start/Resume is pressed.
NOTE: If Start/Resume button is located on top of door, push door firmly closed within 4 seconds of pressing
Start/Resume. If door is not closed within 4 seconds, the Start/Resume button LED will flash, an audible tone
will be heard (on some top control models), and the cycle will not start.
Press to cancel
wash cycle.
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let dishwasher drain completely.
To follow progress
of your dishwasher
cycle.
NOTE: Indicators
shown are not
available on all
models.
The Clean indicator glows when a cycle is finished.
Loading ...
Loading ...
Loading ...