ILve ILWD154XL 154 Bottles Wine Storage Cabinet

User Manual - Page 8

For ILWD154XL.

PDF File Manual, 17 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
8
button: It is used to increase (warm) the temperature in steps of 1°C.
button: It is used to decrease (cool) the temperature in steps of 1°C.
°C/°F button : press this button to switch the indicator light between° C/°F.
button: turns the interior light ON and OFF. If you use this button, the light is no
longer controlled by the switch, and remains ON.(Light button is useless when Energy
conservation button is on ) LED display Display screen shows the temperature setting.
TEMPERATURE SETTINGS
The zone temperature may have a difference of +/- 5°F (+/- 3ºC) from the setting depending
on loading and ambient conditions. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate.
When you press the button once, the temperature will increase or decrease by 1°F (or 1°C).
If you try to go beyond the minimum/maximum value that can be established, the display will
jump to the lowest/highest adjustable temperature value automatically. If a button is not
pressed for 5 seconds, the LED will stop flashing and the setting mode will be exited.
FUNCTIONS
TEMPERATURE MEMORY FUNCTION
If the power is suddenly lost, the set temperature will be saved by the unit. Once the power
is back on, the unit will be at the same set temperature.
TEMPERATURE ALARM FUNCTION
If the interior temperature is higher than 73°F (23°C), “HI” is shown on the display panel and
the buzzer alarm sounds continuously after one hour. This indicates that the inner
temperature is too high, and you should look for the reason. If the inner temperature is
lower than 32°F (0°C),ILBC142BV is lower than 26°F (-3°C) “LO” is shown on the display
panel; the alarm and the malfunction indicator light go on at the same time.
NOTES
If too many bottles are put in at once or the door has not been closed tightly, the unit will
display the "HI" signal on the display panel. This is normal. Please wait 5 minutes after
closing the door and “HI” will disappear.
Loading ...
Loading ...
Loading ...