Loading ...
Loading ...
Loading ...
SNOW SHOVEL ATTACHMENT — SSA1200/SSA1200-FC20
TRANSMISSION GEARS LUBRICATION
The transmission gears in the gear case need be lubricated periodically with gear
grease. Check the gear case grease level about every 50 hours of operation by
removing the sealing screw on the side of the case.
If no grease can be seen on the sides of the gear, follow the steps below to fill with the
gear case with grease up to 3/4 capacity. Do not completely fill the transmission gear
case.
1. Position the edger upright so that
the sealing screw is facing upwards
(Fig. 6).
2. Use the multi-function wrench
provided to loosen and remove the
sealing screw.
3. Use a grease syringe (not included)
to inject some grease into the screw
hole; do not exceed 3/4 capacity.
4. Tighten the sealing screw after
injection.
TRANSPORTING AND STORING
◾
Remove the battery pack from the tool.
◾
Clean the tool thoroughly before storing it.
◾
Store the tool in a dry, well-ventilated area, locked-up or up high, out of the reach
of children. Do not store the tool on or adjacent to fertilizers, gasoline, or other
chemicals.
6
Gear Case
Sealing Screw
Loading ...
Loading ...
Loading ...