Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. U.K. KCPJ1117
Helpline:
+
44
(
0
)
23 8049 4344 Sales Desk:
+
44
(
0
)
23 8049 4333 General Enquiries:
+
44
(
0
)
23 8026 6355
internet: drapertools.com email: [email protected]
INSTRUCTIONS FOR USE:
Objects to be soldered must be clean. Conductors should be
cleaned with steel wool or fine sandpaper.
Before using this iron for the first time the tips should be tinned
using a cored solder or flux until tip is coated with solder.
Be sure tips are tinned before commencing to solder. Occasional
re-tinning will ensure good solder connections.
Apply tip to the work, then apply solder to the work at the point of
tip contact.
Remove the tip from the work. Molten solder must cool
undisturbed.
Do not use more solder than necessary. Just enough to make a
good connection.
Use resin core solder for radio and electrical connections.
Use acid core solder only where flux residue may be washed and
cleaned away. Acid core solder is mainly used for mechanical
connections and rarely used for electrical connections.
After using with acid core, clean soldering iron tip thoroughly.
Spare Tips:
Fine - quote Stock No. - 62079
Medium - quote Stock No. - 62080
Large - quote Stock No. - 62082
62074
SOLDERING
IRON
