Loading ...
Loading ...
Loading ...
Ope ra tion
Operating conditions
10
Proper operation of the appliance is
guaranteed only if the following conditions ar
e
met:
3)
“
“ indicator light
Shows that the compressor is in operation.
The temperature in the room where the
appliance is located conforms to the
climate class stated on the appliance’s
rating label.
4)
“°C/°F” indic
ator light
The temperature scale is changed by
pressing the “°C/°F” button.
5) “
”
button
Maximum ambient relative humidity:
RH75%.
Used to increase (warm) the temperature
in steps of 1°F (or 1°C).
The appliance must be placed at a
sufficient distance from heat sources ( e.g.,
ovens, central heating,
direct sunlight,
etc.).
6) “ ”
button
Used to decrease (cool) the temperature in
steps of 1°F (or 1°C).
7) “°C/°F” b
utton
The appliance must be located in such a
place that it is protected against the effects
of weather.
Press this button to switch the indicator
light between°C/°F.
8) “
” button
Regular maintenance is performed
according to the instructions in this user’s
manual.
Turns the interior light ON and OFF. (If you
use this button, the light is no longer con-
trolled by the reed switch, and remains
ON.)
The ventilation openings on the appliance
must not b
e covered.
Correct installation ( e.g. leveling, the
capacity of the system corresponds to
the specifications on the rating label of
the appliance).
9) LED display
Display screen shows the temperature setting.
Setting the temperature
For Models: EL-27WC-ID,EL-54WC-ID
EL-2160BWC
Insert the power plug into a properly
grounded power socket.
Use the
buttons to set the desired
temperature of the appliance. Each time
the
buttons are pressed, the
temperature will increase / decrease by
1°F (or 1°C).
Control elements
You can set the temperature in the range
of 39°F to 64°F (or 4°C to 18°C) .
1) “
” button
To turn the unit ON and OFF, press and
hold this button for approximately 3 seconds.
2) “
” button
Energy conservation button: Pressing this
button
for 3 seconds will turn the energy
conservation mode ON or OFF. In this
mode, the LED light and display will turn
off, and the °C/°F light will be on.
Loading ...
Loading ...
Loading ...