AEG T8DEE945R 8000 AbsoluteCare 9.0kg

User Manual - Page 17

For T8DEE945R.

PDF File Manual, 32 pages, Read Online | Download pdf file

T8DEE945R photo
Loading ...
Loading ...
Loading ...
Possible causes of unsatisfactory drying
results:
Inadequate default dryness level
settings. See chapter
Adjustment of
default dryness level
Room temperature is too low or too
high. Optimal room temperature is
between 19°-24°C.
9. HINTS AND TIPS
9.1 Ecological hints
Spin the laundry well before drying.
Do not exceed the load sizes which
are specified in the programmes
chapter.
Clean the filter after each drying
cycle.
Do not use fabric softener to wash
and then dry. In the tumble dryer
laundry becomes soft automatically.
The water from the water container
can be used to iron the clothes. You
must first filter the water to eliminate
remaining textile fibres (simple coffee
filter is suitable).
Always keep the airflow slots at the
bottom of the appliance clear.
Make sure there is good airflow where
the appliance is to be installed.
9.2 Adjustment of default
dryness level
To change the default dryness level:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available
programmes.
4. Touch and hold down the Dryness
Level and Anti-crease buttons at the
same time.
One of the symbols appears on the
display:
- Maximum dryness
- Extra dryness
- Standard dryness
5. Touch the Start/Pause button
repeatedly until you reach the
desired dryness level.
Dryness lev-
el
Display symbol
Maximum
dryness
Extra dry-
ness
Standard
dryness
6. To memorise the setting touch and
hold down the Dryness Level and
Anti-crease buttons at the same time
for approximately 2 seconds.
9.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available
programmes.
4. Touch and hold down Anti-crease
and Time Dry buttons at the same
time.
One of 2 configurations is possible:
the Tank indicator:
is on if the
symbol
appears - the
water container indicator is
permanently activated
the Tank indicator: is off if the
symbol appears - the
ENGLISH
17
Loading ...
Loading ...
Loading ...