Loading ...
Loading ...
Loading ...
WARNING: Shut off (disengage) the Tine
Clutch Lever, the Tiller Engine and the Tractor
Engine before making any repairs.
TO REPLACE V-BELT
Replace V-belt if it has been damaged considerably from
slipping under heavy loads or if it show cracks or frayed
edges. Refer to figures 11 and 12.
IMPORTANT: Do not move or remove the belt guide.
if the position of the belt guide is accidenta!iy altered,
return it to the correct setting (6-1/2" above the tine shield
support plate).
• Remove the screw from the top of the belt guard.
• Remove the hex nut from the rear of the guard.
• Remove the belt guard to allow access to drive belt.
• Disengage tine clutch lever and remove bell
• Reverse above procedures for installation of new belt.
TRANSMiSSiON
PULLEY
CLUTCHING
PULLEY
BELT GUIDE
ENGINE
PULLEY
BELT RObq'JNG
TINE SHIELD
SUPPORT
PLATE
FIG. 12
BELT GUIDE
DRIVE BELT
SCREW
/
BELT GUARD T
NUT
TINE SHELD SUPPORT PLATE
FIG. 11
11
Loading ...
Loading ...
Loading ...