IM661C User Manual

Loading ...

· Compressor is overheated

· Need to improve the ventilation

the compressor cools down.

· Unit will resume ice making once

3 seconds

twice approx. every

Fault indicator flashes

· Please keep unit away from direct

sunlight or sources of heat.

· Use colder water or allow the unit to

run a few more batches

No power

(no indicator lights)

· Unit is unplugged

· Power supply is interrupted

· Supplied power voltage is incorrect

· Plug in the ice maker

· Check power supply

· Contact qualied electrician

The Switch light is on

but unit does not run

· Supplied power voltage is incorrect

· PCB damaged

· Contact qualied electrician

· Contact Sunpentown

Ice Full indicator

light is on

· Ice basket is full

· Ambient temperature is below 42°F

· Remove ice cubes from the basket

· Restart unit once ambient temperature is

above 43°F

(Fault + Ice Full)

indicators ashing

· Ice Full Sensor is faulty

· Contact Sunpentown

Fault indicator ashing · Condenser sensor is faulty · Contact Sunpentown

(Ice Full + Water Low)

indicators ashing or

the Fault indicator

ashes rapidly

· Refrigerant leak

· Faulty compressor

· Ambient temperature is below 42°F

or above 109°F

· Contact Sunpentown

· Restart unit once ambient temperature

is within the working temperature range

(Fault + Ice Full + Water Low)

indicators ash slowly

· Faulty HALL sensor

· Faulty paddle motor

· Contact Sunpentown

Fault indicator ashes

rapidly

· Water tray blocked by ice cubes

· Broken water tray

· Faulty ice motor

· Faulty micro-switches

· Remove the ice cubes

· Contact Sunpentown

Unit stops 2 minutes

after powering on. The

Water Low indicator

ashes

· Insufcient water supply

· Water inlet valve damaged or not

properly connected

· Faulty water level sensor

· Check water supply

· Check valve

· Contact Sunpentown

Water Low indicator

is on steady

· Unit is without water supply for more

than 24 hours

· Stop the machine and restart once water

supply is ready.

Ice cubes are stuck to

the water box

· Faulty electric valves

· Some ice remain in the water box

· Contact Sunpentown

· Stop the machine and remove the cubes

No ice making - no light

indications

· Faulty electric valve

· Compressor not running

· Contact Sunpentown

Ice cube sizes are

not uniform

· Low refrigerant

· Contact Sunpentown

Unit goes through ice

making process but no

ice made or ice cubes

are very thin and small

· Room temperature or water may be

too hot

If the unit appears to be malfunctioning, please wait for the unit to stop automatically. The issue may be solved by referring to the

table below. However, do not open to check or repair the unit unless instructed to do so.

Note

· The RUN light does not come on when unit is powered on. It is on when the compressor is running.

· The ice maker has a self-checking feature. Any fault will be displayed in the display panel with different lights ashing.

(Run + Fault + Water Low)

indicators ashing

· Unit just powered on and is going

through the auto-clean/self-inspection

process.

· This is normal process. Please allow 5 to

10 minutes and unit will automatically

begin making ice.

Loading ...

Sunpentown IM661C 16 Inch Stainless Steel Freestanding Ice Maker

User Manual - Page 9