Loading ...
Loading ...
Loading ...
!:{ii_:i:ii_ill¸¸!i__i__:i!!i¸(i iii_i__iilii_:i_!}ii_iiii_{!ii
When canning for long periods, alternate the use of surface
cooking areas, elements or surface burners between batches.
This allows time for the most recently used areas to cool.
• Center the canner on the grate or largest surface cooking
area or element. Canners should not extend more than
1/2"(1.25 cm) outside the cooking area.
• Do not place canner on 2 surface cooking areas, elements or
surface burners at the same time.
• On ceramic glass models, use only flat-bottomed canners.
For more information, contact your local U.S. Government
Agricultural Department Extension Office. Companies that
manufacture home canning products can also offer
assistance.
SETTING RECOMMENDED USE
MED- LO • Stew or steamfood.
• Simmer.
LO • Keep food warm.
• Melt chocolate or butter.
SIMMER Switch • Precise simmer control.
(on some models)
WARM ZONE • Keep cooked foods warm.
Element Switch
REMEMBER: When range is in use or (on some
models) during the Self-Cleaning cycle, the entire
cooktop area may become hot.
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The cooktop controls can be set anywhere between HI and LO.
Push in and turn to setting.
OFF
Lo _ Hi
Med
Use the following chart as a guide when setting heat levels.
RECOMMENDED USESETTING
Dual-Size Element
HI
MED - HI
MED
• Large-diameter cookware.
• Large quantities of food.
• Home canning.
• Bring liquid to a boil.
• Hold a rapid boil.
• Quickly brown or sear food.
• Maintain a slow boil.
• Fry poultry or meat.
• Cook pudding, sauce, icing or gravy.
A ......................
A. Single size
The Dual-Size Elements offer flexibility depending on the size of
the cookware. Single size can be used in the same way as a
regular element. The dual size combines both the single and
outer element and is recommended for larger size cookware,
large quantities of food and home canning.
To Use SINGLE:
1. Push in and turn knob clockwise from the OFF position to the
SINGLE zone anywhere between LO and HI.
2. Turn knob to OFF when finished.
To Use DUAL:
1. Push in and turn knob counterclockwise from the OFF
position to the DUAL zone anywhere between LO and HI.
2. Turn knob to OFF when finished.
OFF
\
o
Hi Hi
Loading ...
Loading ...
Loading ...