Loading ...
Loading ...
Loading ...
Installation
14
2.4 Electrical connection and precautions
Check that the voltage and the frequency of the mains match the ratings
on the name plate of the appliance positioned on the inner edge of the
door.
The plug on the supply cord and the corresponding socket outlet must be
of the same type and meet the regulations in force.
The plug must be accessible after installation.
Never disconnect the plug by pulling on the power supply lead.
After changing the supply cord, make sure that the bracket which secures
the cord is fixed securely in place.
Do not use adaptors or shunt connections in order to avoid the
possibility of overheating or burning.
In the event of damage to the supply cord, have it replaced by the
manufacturer or an Authorized Technical Service Centre in order to
avoid any risk.
Some components are live even with the ON/OFF position. Before
performing any maintenance work on the appliance, disconnect it
from the electrical power supply.
IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD:
An omnipolar circuit breaker in overvoltage protection class III must be
installed in an easily accessible position on the power supply line.
The connection to the mains must be carried out by a qualified technician
in accordance to the scheme shown below and the regulations in force.
Loading ...
Loading ...
Loading ...