Loading ...
Loading ...
Loading ...
en Avoiding material damage
14
▶
Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶
Never place the appliance on or near hot surfaces.
▶
After switching off, wait until the drive has come to a complete
standstill.
▶
Keep hands, hair, clothing and utensils away from rotating parts.
▶
Never leave the appliance switched on if the power supply is in-
terrupted. The appliance will automatically start up again follow-
ing the interruption in the power supply.
▶
Only attach and remove accessories once the drive has stopped
and the appliance has been unplugged.
▶
Never touch the edges of the blades with bare hands.
▶
Process hot food carefully.
▶
Leave boiling food to cool down to at least 70°C before pro-
cessing.
▶
Follow the cleaning instructions.
▶
Clean surfaces which come in contact with food before each
use.
Avoiding material damage
▶
Do not operate the appliance at no-load.
▶
Never use the blender jug in the mi-
crowave or oven.
Overview
→Fig.
1
1
Switch
2
Ejector button
3
Release buttons
4
Apertures (with lock) for inserting
thetools
5
Self-closing rear aperture
6
"Fine Creamer" stirring whisks
7
Kneading hooks
8
Lid
1
9
Plastic blender jug
1
1
Depending on the model
2
separate operating instructions
10
High-speed hand blender
1
11
Universal cutter
1
2
1
Depending on the model
2
separate operating instructions
Note:If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
Operating elements
Ejector button
For removing the tools.
Note:The ejector button can only be actu-
ated if the switch is position
.
Self-closing rear aperture
for inserting accessories, e.g. high-speed
hand blender.
Only open the lock when the switch is in po-
sition
.
Release buttons
For removing the accessories from therear
aperture.
Loading ...
Loading ...
Loading ...