Loading ...
Loading ...
Loading ...
132 - CLEANING AND MAINTENANCE 91477A327/A
2. Place an empty jug on the open door.
3. Touch the WAND button on the
display (positioned in the lower area ).
4. Pull out the wand and dip the end into the
bottom of the empty jug.
5. Press the START button to start draining
the water left in the jug.
6. Wait for the end of the drain flow.
7. Make sure that no more water comes out of
the wand, then touch the STOP button .
8. Then touch the EMPTY RESERVOIR
CALIBRATION button to continue
calibration.
Full reservoir calibration
1. Fill a jug with exactly 1 litre of water.
2. Place the jug with 1 litre of water on the
open door.
3. Immerse the end of it into the jug until it
reaches the bottom.
4. Press the START button to start filling the
appliance reservoir with water.
5. Wait for the end of the reservoir filling.
6. Make sure that the appliance has sucked up
all the water contained in the jug, then touch
the STOP button .
7. Place the loading wand back in its holder.
8. Remove the jug.
9. Close the door.
10.Touch the FULL RESERVOIR CALIBRATION
button to complete calibration.
11. Wait for the end of calibration.
On completion, a warning on the display
indicates the end of the calibration procedure.
Pay attention to the distance to be
maintained so as not to be hit by the
wand projection.
We recommend using a digital kitchen
scale and measuring 1000 grams of
water.
When the door is closed, an automatic
system will automatically draw in any
residual water in the loading wand to
avoid drips. A bubbling noise may be
heard; this is completely normal.
Loading ...
Loading ...
Loading ...