Loading ...
Loading ...
Loading ...
SERVICE A ADJUSTMENTS
, iii ii
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 28)
. Raise hood.,
• Unsnap headlight wire connector.
• Stand in front of tracton, Grasp hood at sides, tilt toward
engine and lift off of tractor.
. To replace, reverse above procedures.
HOOD
HEADLIGHT
WIRE
CONNECTOR
TO REPLACE HEADLIGHT BULB
• Raise hood_
• Pull bulb holder out of the hole in the backside of the
grill
• Replace bulb in hotder and push bulb holder securely
back into the hole in the backside of the grill
• Ctose hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running, or prevent it from starting
° Check wiring See electrical wiring diagram in the
Repair Parts section of this manual.
TO REPLACE FUSE
Replace with 30 amp automotive-type plug-in fuse. The
fuse holder is located behind the dash,
FIG. 2B
22
Loading ...
Loading ...
Loading ...