Loading ...
Loading ...
Loading ...
Installing the Transmitter on Your Tank Regulator
WARNING
Always use the pre-installed flow restrictor when using the transmitter directly attached to your regulator.
Always use the included air spool when connecting the transmitter to a high pressure hose extension (Installing
the Transmitter on a High Pressure Hose Extension, page 15). Using the transmitter without either the flow
restrictor or air spool could result in serious injury or death from an air pressurization failure.
Before you install the transmitter on your tank regulator, you should read the transmitter position tips and
choose the port position that provides the best line of sight to the dive computer.
To install the transmitter, you need a
5
/
8
in. (16 mm) open-ended wrench.
The transmitter connects to a high pressure output port of the first-stage regulator.
1 Confirm the regulator is depressurized and detached from a scuba cylinder.
2 Remove the port plug from the high pressure output port of the first-stage regulator.
3 Confirm the flow restrictor is installed in the transmitter.
Diving 13
Loading ...
Loading ...
Loading ...