Loading ...
Loading ...
Loading ...
Service and Installation Manual
9
DANGER
Hold the and keys together for more than 3s, till the “POF” message is displayed.
3. ALARM SIGNALS
HOW TO SEE THE ALARM AND
RESET THE RECORDED ALARM
1. Hold the or key to
display the alarm signals.
2. When the signal is displayed, hold
the SET key until the “rst” message
is displayed, and push the SET key
again. The “rst” message starts
blinking and the normal temperature
will be displayed
MAINTENANCE
The power switch must be turned to OFF and the unit disconnected from the
power source whenever performing service, maintenance functions or
cleaning the refrigerated area.
1. CLEANING
1.1 CLEANING STAINLESS STEEL INTERIOR AND EXTERIOR
Damage to stainless steel finish due to improper use of cleaning products or
non-recommended products is NOT covered under this product's warranty.
• Do
- Use warm, soapy water and a soft, clean cloth or sponge
- Rinse surfaces with clean, warm water and dry immediately to avoid water spots
• DO NOT USE
- Abrasive or harsh cleaners
- Ammonia
- Chlorine bleach
- Concentrated detergents or solvents
- Metal or plastic-textured scouring pads
- Vinegar-based products
- Citrus-based cleaners
- Detergents that contain chlorine
Note: It suggested that the unit be emptied daily after all peak demand periods have passed, and
any remaining contents be placed in a storage refrigerator. The unit should be unplugged and
opened to allow it to defrost naturally. Let the unit air dry after cleaning and plug the unit in to
rebuild it frost layer at least 3 hours to loading with product.
1.2 CLEANING THE CONDENSER FINS
-To maintain proper refrigeration performance, the condenser coil must be free of dust, dirt
and grease
-This will require periodic cleaning. Condenser fins should be cleaned at least every month or as
Loading ...
Loading ...
Loading ...