Loading ...
Loading ...
Loading ...
6
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
BEFORE FIRST USE
1. Unpack the appliance and all parts. Remove all packaging
materials, including any stickers or labels.
2. Before the rst use, please check if all the parts of the
appliance are in good condition. If not, please contact the
seller or manufacturer.
3. Clean the interior surface of the coffee maker with a damp
cloth. Wipe dry with a soft cloth immediately. Do not use
abrasive materials. Wipe down the exterior with a soft dry
cloth.
4. NEVER IMMERSE APPLIANCE OR CORD IN WATER OR ANY
OTHER LIQUID.
5. Position the coffee maker on a stable, dry, level,
heat-resistant surface near an electrical outlet.
6. Unroll the electrical cord.
7. Operate the coffee maker on a separate outlet and circuit
from other appliances to avoid overloading the circuit.
8. It is recommended to run the coffee maker for one cycle
with just plain water and no coffee to clean the internal
parts of the coffee maker.
NOTE:
Never leave the
empty carafe on the
warming plate when
coffee maker is on.
Otherwise the carafe
is liable to crack.
HOW TO USE
1. Make sure all parts are dry and that the unit is not plugged
into an electrical outlet while lling with water and coffee
grounds.
2. Open the top cover and ll the water tank with fresh water.
The water level should not exceed MAX level as indicated
on the water level gauge.
3. Add coffee ground into lter. Usually a cup of coffee need
a level spoon of coffee ground, but you may adjust accord-
ing to personal taste. Then assemble the lter with coffee
ground into the funnel and close the top cover.
4. Insert the carafe on the warming plate.
5. Plug the power cord into the outlet. Press the power
switch, the indicator will be illuminated. The coffeemaker
will begin working.
6. The brewing process can be interrupted by pressing the
power switch. The appliance will continue brewing once
the switch is pressed again.
PAUSE ‘N SERVE FEATURE:
During the middle of brewing process, you can pause the cycle
by simply removing the carafe out of the coffee maker to sneak
a cup of coffee. The drip stop valve will pause the brewing
cycle for 30 seconds and keep coffee from dripping into the
carafe.
To stop brewing, turn
the switch off at any
time.
-
Do not touch the
warming plate as it
is hot!
-
-
Do not touch the lid
during brewing.
-
After brewing cycle is
complete, wait a
minimum of 10
minutes before taking
out the lter basket to
avoid any injury from
hot steam.
-
Make sure the lter is
secured back in place
before beginning to
operate your
coffeemaker.
-
Loading ...
Loading ...
Loading ...