Loading ...
Loading ...
Loading ...
– 15 –
8.8 FILLING WITH ENGINE FUEL –
FIG. 15
Warning!
Petrol is highly flammable and extreme precaution
must be taken when handling or working with it. Keep
out of reach of children. Refuel in a well-ventilated
area with the engine stopped. Do not smoke or allow
flame or sparks in the area where the engine is
refuelled or where petrol is stored. Avoid repeated or
prolonged contact with skin or inhalation of vapour.
Take extra care when filling a hot engine. Avoid if
possible, and wait for the engine to cool before filling.
Caution!
Always use clean, fresh unleaded petrol (RON95).
Purchase fuel in quantities that can be used within
30 days. Never mix oil with petrol. Do not fill into
the base of neck to allow for fuel expansion. Do not
overfill the fuel tank. To prevent engine damage the
engine is shipped without oil or petrol. The engine
must be filled with the correct grade of oil and
petrol before starting the engine.
Clean the area around the fuel tank cap (10)
before removing it. Remove the warning tag and
check the fuel level. Refill the tank if the fuel level
is low. Refuel carefully to avoid overfilling or spilling
fuel. There should be no fuel in the filler neck.
Clean up any overflow or splashes of petrol before
starting the engine. Tighten the filler cap after
filling, finger tight on.
8.9 SETTING THE CUTTING HEIGHT –
FIG. 16
Caution!
Adjust the cutting height only when the engine is
switched off and the spark plug boot has been pulled.
The cutting height is centrally adjusted with the
height adjusting handle (19). Different cutting
heights can be selected from position 1 to position
7. The cutting height range is from 25mm to 75mm.
Pull the adjusting handle out and select the
desired cutting height. The handle snaps into
the desired position.
8.10 SETTING REQUIRED FUNCTION –
FIG. 17
This lawn mower has three functions. These functions
can be converted by changing the accessory setting.
FIG. 15
(10)
FIG. 16
(19)
FIG. 17
Loading ...
Loading ...
Loading ...