Loading ...
Loading ...
Loading ...
LAUNDRY TUB DRAIN SYSTEM
Check location where washer will be
installed. This washer can be installed
using one of three, systems:
• Laundry tub drain system (below)
• Standpipe drain system (p. 12)
• Floor drain system (p. 12)
Do not store or operate washer at or
below 32°F (some water may remain in
washer). See page 30 for Winterizing
Information.
Proper installation is your responsibility.
Make sure you have everything necessary
for correct installation including the
following points:
Grounded receptacle: Must
be within 4 feet of where the
power cord is attached to the
back of the washer.
Hot and cold water faucets:
Must be within 4 feet of the
hot and cold water fill valves
attached to the back of the
washer and provide water
pressure between
5-100 P.S.I.
Water heater: To get the
best washing results, set
water heater to deliver
140°F water to washer.
Laundry tub drain system:
Needs a minimum 20-gallon
laundry tub.
Support: Floor must be sturdy
enough to support a total weight
of 315 pounds (including washer,
water, and load weight).
Level floor: Maximum
allowableslope under entire
washer- 1 inch.
Top of tub must be at
least 39 inches high
and no higher than
96 inches from bottom
of washer.
11
s-
Loading ...
Loading ...
Loading ...