Loading ...
Loading ...
Loading ...
Replacing Light Bulbs
To avoid eJectricaJ shock which can cause severe
personaJ injupi or death, disconnect power to
refrigerator before repJacing JJght bulb. After
repJacing light bulb, reconnect power.
To avoid personaJ injury or property damage,
observe the foJJowing:
, Allow light bulb to cool.
, Wear gloves when rephcJng light bulb.
Fresh Food Section
1. Slide clear Jight shieJd toward
back of compartment to
release from light assembly.
2. Remove light bulb&
3. Replace with appJiance bulbs
#o greater tha# ziO watts.
4. Replace Jight bulb cover by inserting tabs on light
shield into liner holes on each side of light
assembly. Slide shield toward front of refrigerator
until it locks into place. [}o not force shield beyond
locking point. Doing so may damage light shield.
Freezer
1, Reach behind the light
cover,
2. With firm pressure, press
forward on the notches at
the back of the cover and
pull down. The cover will
open from the back.
3. Remove the cover.
,
5.
Remove light bulb.
Replace bulb with
appliance bulb #o
greater than 40 watts.
Insert front tabs of Jight
cover into sJots in freezer
liner and snap rear
portion over Jight
assembly until rear tab
engages.
-- !;! ii ii iiiii iiiiiiiii!iiiiiiiii
iz!!!i
25
Loading ...
Loading ...
Loading ...