Loading ...
Loading ...
Loading ...
TemperatureControls
The fresh food control is located at the top of the fresh
food compartment.
FRESH FOOD TEMP
7 ISCOLDESTUNUTIAL SETTING 4
og -4
The freezer control is located at the back of the freezer
compartment.
INITIAL SETTING
COLDEST_COLD
FREEZER CONTROL
Initial Settings
• The fresh food control has settings from 1 (cold) to
7 (coldest). Initially set this control on/4.
• The freezer control has settings from cold to coldest.
Initially set this control at the mid-line initial setting.
Note
• Your refrigerator will run continuously for several
hours when you first start it. This is normal.
• Let the refrigerator run at least four hours before
adding food.
Fresh Food Adjust fresh food control
Compartment to next higher setting.
too Warm
Fresh Food Adjust fresh food control
Compartment to next lower setting.
too Cold
Freezer too Warm Adjust freezer control to
next colder setting.
Freezer too Cold Adjust freezer control to
next warmer setting.
Turn Refrigerator Set fresh food control to
"OFF .... OFF".*
• Turning the fresh food control to "OFF" stops cooling
in both compartments. It does not shut off power to
the refrigerator.
No Defrosting
Your refrigerator is designed to defrost automatically.
Note
• During the automatic defrost cycle, you may notice
a red glow/reflection in the vents on the back wall
of the freezer compartment and you may hear the
sound of water droplets coming into contact with
the defrost heater. This is normal during the
defrost cycle.
Adjusting the Temperature
Controls
• 24 hours after adding food, you may decide that one
or both compartments should be colder or warmer. If
so, adjust the control(s) as indicated in the following
table.
• Except when starting the refrigerator, do not change
either control more than one number at a time.
• Allow 2/4hours for temperatures to stabilize before
resetting.
• Changing either control will have some effect on the
temperature of the other compartment.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be
warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the
cabinet. The condition will be more noticeable when
you first start the refrigerator, during hot weather and
after excessive or lengthy door openings.
Loading ...
Loading ...
Loading ...