Loading ...
Loading ...
Loading ...
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand_
Handle
Release
Pedal
HANDLE MOUNTED
To start the vacuum cleaner, slide the
On/Off switch from the OFF position to the
ON position_ TO stop the vacuum cleaner,
slide the On/Off switch to the OFF position_
Crevice
Dusting
Brush _
Combinat/on| rg
Brush-__
- Stretch
Hose
Identify each of the attachments shown
above.,
TO USE ATTACHMENTS
Place the carpet/bare floor selector in the
bare floor setting by rotating the selector
back and down to the bare floor setting.
See CARPETIBARE FLOOR SELECTOR
section.
When returning the bare floor selector to
the carpet setting, use caution as the selec-
tor can move quickly to that setting due to
tension created by the belt,
Remove the lower end of the stretch hose
from the cleaner by grasping the hose col-
lar, twisting and pulling straight out. The
attachments can now be added to the hose.
Note: The motor protector may open
when using attachments or when cleaning
new carpet, due to reduced airflow by the
attachments themselves or by new carpet
fuzz filling the dust bin quickly. See the
TROUBLESHOOTING section.
WARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit,
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
Loading ...
Loading ...
Loading ...